38
STORAGE
Follow the instructions below for storing your log splitter between uses.
1.
Retract the wedge completely to keep the rod protected from corrosion.
2.
Allow the log splitter to cool before storing.
3.
Clear the debris from the beam, wedge, and end plate. Use a damp cloth to clear
exterior surfaces of the engine and log splitter. Use a soft bristle brush to remove excess
dirt and oil. Use an air compressor (25 PSI) if necessary to clear dirt and small debris.
Wipe the beam, wedge, and all metal parts with an oil rag to prevent corrosion.
4.
Refer to the engine manual for proper engine storage instructions.
5.
Store the log splitter in a location away from corrosive materials, sources of heat,
open
flames, sparks, or pilot lights.
CAUTION!
Never spray the engine or log splitter with a pressure washer. Water can
contaminate the fuel system and can enter the engine and damage the engine.
CAUTION!
Never store the log splitter inside where there is a source of heat or
an open flame, spark, or pilot light, such as a water heater, space heater, furnace,
clothes dryer, or other gas appliance. EVEN IF the log splitters fuel tank is empty,
residual petrol vapours could ignite.
Never store the log splitter near fertilizer or any other corrosive material.