34
Moving the log splitter by hand
1
. Ensure the log splitter is in the horizontal position with the lock latch engaged.
2
. The engine is off and the fuel lever is fully left, closed position.
2
. Ensure the jockey wheel (6) is on the ground supporting the weight of the log
splitter (fig. 66).
3
. Before moving you must raise and lock
the front support leg (7) in the horizontal
position.
Firstly pull the U-shaped lock pin away from
the log splitter. Rotate the U-shaped lock
pin to lift the support leg to the horizontal
position. Release to lock in the support leg
horizontally (fig. 68).
4
. Remove pin and raise the rear support leg (13) in the
uppermost position. Refit the pin to lock in position
(fig. 69).
TRANSPORTING
WARNING!
The log splitter is heavy. It can crush and cause serious injury if it rolls
out of control or tips over.
WARNING!
Never move the log splitter with its engine running.
WARNING!
Never move the log splitter up or down hills by hand.
WARNING!
Never allow anyone to sit or ride on the log splitter.
WARNING!
Never transport cargo or wood on the log splitter.
LOCK
Fig. 68
Fig. 69