35
Towing
1
. Ensure the log splitter is in the horizontal position with the lock latch engaged.
2
. The engine is off and the fuel lever is fully left, closed position.
3
. Check the tires to ensure they are at the recommended tyre pressure (30 PSI).
4
. Inspect the tow hitch (4) and chains for any damage and ensure they are in good working
order.
5
. Ensure the jockey wheel (6) is on the ground supporting the weight of the log splitter and
the front support leg (7) is raised and locked in the horizontal position.
6
. Raise the rear support leg (13) in the uppermost position.
7
. Raise the jockey wheel (6) to lower the log splitter down and lock the tow hitch (4) onto
the ball hitch. Connect both safety chains (5) to the tow vehicle.
TRANSPORTING (cont.)
WARNING!
Never tow log splitter over 30km/h. Faster speeds may result in loss of
control.
WARNING!
Drive slowly and take extra care when travelling over rough terrain
WARNING!
Never allow anyone to sit or ride on the log splitter.
WARNING!
Never transport cargo or wood on the log splitter.
8
. Lock the front support leg (7) down, vertical position before disconnecting from vehicle.
WARNING!
Never operate the log splitter while it is attached to a vehicle.
WARNING!
Not for towing on public roads.