18
ASSEMBLY (cont.)
Horizontal beam lock assembly
Tools required (not supplied):
¥ 16mm Socket with ratchet.
1.
Use assembly hardware
7
2.
Align the two holes in the horizontal beam
lock (26) and the holes in the underside of
the beam (16). Ensure the release handle
is opposite side to the engine. Secure in
place with bolt, flat washers and spring
washers (fig. 18).
Ø18 x 135
x 1
R-Clip
x 1
M10 x 35 x 6
M12 x 35 x 8
M12 x 80 x 2
x 1
x 1
6 x 40
x 2
M8 x 20 x 2
M12 x 30 x 4
Axle Nut & Washer
x 1
Split Pin 4 x 50
x 1
x 1
M8 x 20
x 8
M10 x 25 x 4
Wheel Cap
Roll Pin
U-shaped Lock Pin
Washer & Sping
Pivot pin
M10 x 25 x 2
Sleeves
Split Pin
Bolt & Washer
Nut & Washer
Axle
Upper Bracket
Lower Bracket
Bearing
Anti-dust Washer
Axle Nut
Wheel Cap
Washer
Wheel Axle
3.
Follow the same procedure on page 15,
step 3 - 8, to assemble the second wheel
(11) (fig. 17).
Fig. 17
Fig. 18