19
ASSEMBLY (cont.)
Jockey wheel assembly
1.
Place the jockey wheel (6) into its bracket on the drawbar (19) (fig. 19).
2.
Secure by tightening the locking pin on the bracket (fig. 20).
Support leg (front) assembly
Tools required (not supplied):
¥ Long nose pliers and hammer.
1.
Use assembly hardware
8
2.
Align the front support leg (7) to the upper
hole on the beam bracket. Insert the long
end of the U-shaped lock pin to hold the
support leg (7) in place. (fig. 21).
3.
Lift the log splitter by the drawbar (19) to
allow the support leg (7) to drop down in
position to supporting the log splitter.
Ø18 x 135
x 1
R-Clip
x 1
M10 x 35 x 6
M12 x 35 x 8
M12 x 80 x 2
x 1
x 1
6 x 40
x 2
M8 x 20 x 2
M12 x 30 x 4
Axle Nut & Washer
x 1
Split Pin 4 x 50
x 1
x 1
M8 x 20
x 8
M10 x 25 x 4
Wheel Cap
Roll Pin
U-shaped Lock Pin
Washer & Sping
Pivot pin
M10 x 25 x 2
Upper
Hole
Fig. 19
Fig. 20
Fig. 21