13
ASSEMBLY (cont.)
Wedge cover guard
Tools required (not supplied):
¥ 16mm Socket with ratchet.
1.
Use assembly hardware
2
2.
Slide hydraulic cylinder (2) backwards and
align post mount with cutouts in
frame (fig. 6).
Ø18 x 135
x 1
R-Clip
x 1
M10 x 35 x 6
M12 x 35 x 8
M12 x 80 x 2
x 1
x 1
6 x 40
x 2
M8 x 20 x 2
M12 x 30 x 4
Axle Nut & Washer
x 1
Split Pin 4 x 50
x 1
x 1
M8 x 20
x 8
M10 x 25 x 4
Wheel Cap
Roll Pin
U-shaped Lock Pin
Washer & Sping
Pivot pin
M10 x 25 x 2
R-Clip
Washer
Pivot Pit
Hydraulic Cylinder
Engine
Assembly
Post
Fig. 6
4.
Install the wedge cover guard (17) with the
six bolts, spring and flat washers (fig. 7).
3.
Align the holes with the wedge cover
guard (17) and the posts (fig. 7).
Fig. 7