Fukuda Denshi DSL-8001, Service Manual

Page: 24 / 150

Precautions about Use of SpO
2
Sensor
D A N G E R
Burn Risk in Using SpO
2
Sensor
In SpO
2
monitoring, always use the sensor/relay cable specified by
Fukuda Denshi. If any other sensor/relay cable is used, the sensor
temperature may increase too high, place the patient in danger of
burns.
If there are any questions regarding the sensor/relay cable use for
SpO
2
measurements of this device, please contact Fukuda Denshi
service representative.
Precautions for Use of NIBP Cuff
C A U T I O N
This product contains natural rubber latex which may cause allergic
reactions.
(FDA: Medical Alert on Latex Products, “Allergic Reactions to
Latex-Containing Medical Devices”, Food & Drug Administration, 9200
Corporate Blvd., Rockville, MD 20850, 1991.)
Disposing of Equipment, Accessories, or Components
C A U T I O N
When disposing of this product, accessories, or components, use an
industrial waste distributor. Do not dispose of as ordinary waste.
Precautions about Transportation
When transporting this equipment, pack it with specified packing materials.
Reference
Refer to "2. Specification -Specification / Performance", for environmental condition during
transportation.
Precautions about RTC or Data Backup
C A U T I O N
This unit is equipped with a built-in clock. When the power of this unit is
turned OFF, this clock is backed up by a lithium primary battery. If
incorrect time is displayed when the power is turned on, the lithium battery
may be running down. In such case, contact Fukuda Denshi service
representative for replacing the battery.
To Prepare for Emergency Use
1. Accessories / Optional Accessories
(1) The ECG electrodes are consumable products. Always prepare extra supplies of
electrodes.
(2) Verify that there are no breaks on the patient cable. Check the operation once a week.
xx