1/6
WCM16 -- Headset Condenser Microphone
General Description
The Shure Model WCM16 head-worn electret condenser microphone is intended for wireless use by performers,
lecturers, and others who require the highest quality voice pickup with maximum mobility. Its wide frequency re
sponse, low RF susceptibility and reliable operation at temperature and humidity extremes make the WCM16 suit
able for virtually any vocal application. When used with the Shure Body-Pack Transmitters, the performance of the
WCM16 closely resembles the finest conventional vocal microphones.
Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warm proximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.
The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits high
er gain-before-feedback without loss or masking of vocals.
FEATURES:
•
Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
•
Response comparable to the finest conventional vocal microphones
• Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other per
formers
•
Uniform polar pattern at all frequencies for maximum gain before feedback
•
High input clipping level eliminates overload distortion
•
Supplied acoustic foam pop screen
•
Reliable at temperature and humidity extremes
Wearing the Microphone Headset
1. Place the microphone on the user's head so that the large diameter band is horizontal across the back of the
head. The band may be completely hidden under the hair. The ends of the headband should fit comfortably in
front of the ears. Extend or retract the adjustable headband (see Figure 1) to achieve this result.
2. For maximum gain before feedback, carefully extend or retract the boom (see Figure 1) so that the microphone
grille (silver side) is within 40 mm (1-1/2 in.) of the left corner of the mouth. It may be necessary to bend the
