Shure Incorporated
3/6
Connecting to a Transmitter
The WCM16 is configured for direct connection to a Shure Body-Pack Transmitter, such as models T1, T1G, T11,
SC1, EC1, or LX1, using the attached cable.
Microphone Powering
The WCM16 is designed to be powered from the +5 Vdc source at microphone connector pin 2 of a Shure trans
mitter.
Specifications
(Measured using test circuit in Figure 4)
Type
Condenser (electret bias)
Frequency Response
50 to 18,000
Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0
dBV
(1.8
mV
at 0.6
m
) 1 Pascal=94 dB SPL
Maximum Sound Pressure Level
150
dB
at 1%THD
Dynamic Range
121
dB
Output Noise
29
dB
equivalent SPL, A-weighted
