Fukuda Denshi DSL-8001, Service Manual

Page: 43 / 150

2 － 5
NOTE
The SpO
2
measurement accuracy is determined based on the values of
the root-meansquare (rms) difference between SpO
2
readings of the
pulse oximeter equipment and values of SaO
2
determined with a
CO-oximeter, by healthy adult volunteers. The pulse oximeter equipment
measurements are statistically distributed; ±2% measurement accuracy
means that only about two-thirds of pulse oximeter equipment
measurements can be expected to fall within ±2% of the value measured
by a CO-oximeter.
NIBP (Non-Invasive Blood Pressure)
(EN 60601-2-30: 2000 / IEC 60601-2-30: 1999 Medical electrical equipment-Part 2: Particular
requirements for the safety of automatic cycling indirect blood pressure monitoring
equipment)
(AAMI SP10: 2002+A1:2003+A1:2006+(R)2008 Manual, electronic or automated
Sphygmomanometers)
Measurement Method : Oscillometric Method
Measurement Range : Adult 10 to 280mmHg/1.3 to 37.3kPa
Child 10 to 180mmHg/1.3 to 24.0kPa
Neonate 10 to 130mmHg/1.3 to 17.3kPa
Resolution : 1mmHg
Static Pressure Accuracy : ± 3 mmHg/0.4kPa
Accuracy
Maximum Standard Deviation : 8mmHg/1.0kPa
Maximum Average Error
: ± 5mmHg/0.6kPa
PR Measurement Range : 40 to 240bpm
PR Measurement Range : ± 2% or ± 2 bpm, whichever greater.
Deflation Speed : 5 ± 1 mmHg/sec (Quick Measurement OFF)
10 ± 2 mmHg/sec (Quick Measurement ON)
Safety Mechanism : Adult 300mmHg or above
Child 210mmHg or above
Neonate 150mmHg or above
NOTE
Blood pressure measurements determined with this device are equivalent
to those obtained by a trained observer using the cuff/stethoscope
ausculation method, within the limits prescribed by the American National
Standard, Electronic or automated sphygmomanometers.
Printing (Printer Unit)
Printing Speed : 50mm/s, 25mm/s (Error: within ± 5%)
Resolution : 8 dots/mm
Printing Waveforms : Maximum of 3 waveforms
Printing Type
: Manual Printing, Alarm Printing, Period Printing, Table Printing, Trend
Printing
Detection : Paper Out