Fukuda Denshi DS-7001, Service Manual

Page: 124 / 151

Equipment Status Alarm Message
The equipment status alarm message will be displayed when proper monitoring cannot be
performed. Some messages are displayed on the numeric data display area.
The message will be displayed according to the priority.
If more than one alarm are generated, the two higher priority alarms will be alternately
displayed.
CAUTION
While the “LEAD OFF” message is displayed, the HR alarm will not
generate. Leaving this condition unresolved may result in missing a
sudden change of the patient. Promptly check the electrodes when
this message is displayed.
Priority Message
Displayed
Color
Description
DEMO DEMO mode
High BATTERY The remaining battery capacity is less than 10 minutes.
TELE. ER Telemetry module error.
NO CARD The CF card is not inserted.
Com Err Communication error with the SpO
2
hardware
CVA
ECG waveform is superimposed on the respiration
waveform.
Sensor Err SpO
2
sensor failure.
PULSE? Searching pulse.
MOTION Body motion is present during SpO
2
measurement.
NIBP ERR
NIBP measurement error.
(Cuff inflation pressure, measurement duration has
exceeded the upper limit.)
CF ERR Detected error during CF card usage.
CF FULL
Yellow
No space on the CF card to write the data.
CF REC Recording waveform data on the CF card.
Low CF INIT
Blue
Checking the inserted CF card.
7 － 10