76
SPARC Enterprise T5440 Server Product Notes • December 2010
FRU Status in the
prtdiag -v
command output:
Workaround:
None. This can be safely ignored. To check the fibre channel card mount, use IO
Devices of the
prtdiag
command of Solaris OS.
The
prtdiag
command execution result:
Firmware and General Software Issues
lists the firmware and general software issues that have been fixed.
#
prtdiag -v
...
=========================== FRU Status ===========================
Location
Name
Status
------------------------------------------------------
...
SYS/MB/RISER1/PCIE1
F20CARD
enabled
...
#
prtdiag
...
=========================== IO Devices ===========================
Slot +
Bus Name +
Model
Status
Type Path
-----------------------------------------------------------------
...
MB
FIBRE fibre-channel
/pci@500/pci@0/pci@9/fibre-channel
...
TABLE A-4
Fixed Firmware and General Software Issues
CR ID
Description
Workaround
6731027
Under certain conditions, the system might not
power off when the Solaris OS is halted. The
system might appear unresponsive in this case
with no messages in at the system console or on
the SC console.
Note - Fixed in System Firmware 7.1.8.a or later.
Power off the system using one of the following
methods:
• The ILOM
stop/SYS
command
• The ALOM
poweroff
command
Summary of Contents for SPARC Enterprise T5440 Server
