Fujitsu SPARC Enterprise T5440 Server, User Manual

Page: 41 / 92

Chapter 3 Known Issues 31
On-Board Network Port Disabled by an XAUI
Card
A 10GbE XFP XAUI Adapter Card (XAUI card) in slot 4 disables on-board network
port 1 (NET1). The XAUI card in slot 5 disables on-board network port 0 (NET0).
FIGURE 3-1
XAUI Cards and On-board Network Ports
n/a When the system is initialized, firmware is
loaded and occupies approximately 128 MB to
352 MB of the host memory. The banner and
other software utilities report an amount of
memory minus the amount of memory that is
occupied by firmware. When viewing the amount of memory in the
banner, be aware that the banner reports the
amount less what is used by the firmware.
n/a RAID volume crashes at the power recovery
after the power failure. Do not use the RAID.
6823448 The OK/Activity LEDs on SSDs behave
differently than the OK/Activity LEDs on
conventional hard drives (HDDs). For example,
when the OS is running, LEDs on HDDs is lit,
but the LEDs on SSDs remain off. However,
when there is an access to the SSD, the LED
flashes. None.
TABLE 3-1
Hardware and Mechanical Issues (Continued)
CR ID Description Workaround
NET
2
NET
3
NET
0
NET
1
Slot 0 1 2 3 4 5 6 7
XAUI0 XAUI1
One-way only One-way only
On-board
Network port