Fujitsu SPARC Enterprise T5440 Server, User Manual

Page: 22 / 92

12 SPARC Enterprise T5440 Server Product Notes • December 2010
How to obtain the host console in System Firmware 7.2.8 or later is as follows.
About the Addition of Protocols for Firmware Update
In System Firmware 7.2.8 or later, three protocols which can be used in the firmware
update via the ILOM CLI interface have been added. In addition to the conventional
tftp, you can use ftp, sftp, and scp.
The scp protocol execution example:
-> show /HOST/console
/HOST/console
Targets:
history
Properties:
escapechars = #.
line_count = 0
pause_count = 0
start_from = end
Commands:
cd
show
start
stop
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started. To stop, type #.
XXXXXX console login:
-> load -source
scp://xxxxx:xxxxxx@XXX.XXX.XXX.XXX//mnt1/Firmware_Update/Huron/7.2.8 /
/Sun_System_Firmware-7_2_8-SPARC_EnterprisT5220.pkg
NOTE: An upgrade takes several minutes to complete. ILOM will enter a special
mode to load new firmware. No other tasks can be performed in ILOM until the
firmware upgrade is complete and ILOM is reset.
Are you sure you want to load the specified file (y/n)? y
Do you want to preserve the configuration (y/n)? y
................................................................
.......................................................