38
SPARC Enterprise T5440 Server Product Notes • December 2010
6723410
If you repeat in sequence a login to the service
processor, executing a command, and logging
out, logout may fail.
If this problem occurs, terminate the login
session on the client from which you have
accessed the service processor.
6837115
On the ILOM Web interface, when you change
the "Alert Management" settings from "Level:
minor" and "Type: IPMI PET" to "Type: SNMP
Trap," the level setting changes to "disable." The
level must be set again.
None.
6881020
When you set
/HOST bootfailrecovery
to
powercycle, powercycle (host power-off/on)
fails to be executed.
None.
Set to
poweroff
, wait for the host power turns
off and then manually turn on the host power.
6913388
The ILOM event log may not be in the Solaris
OS system log output (/var/adm/messages).
ILOM login event example:
Nov 7 14:13:03 xxxxxx SC Alert: [ID
178418 daemon.notice] Audit | minor:
admin : Open Session :
object = /session/type : value =
shell : success
Nov 7 14:13:04 xxxxxx SC Alert: [ID
434268 daemon.notice] Audit | minor:
admin : Close Session :
object = /session/type : value =
shell : success
None.
Perform the ILOM reset operation. If not
recovered, shut down the system and then
remove and insert the power cord.
ILOM reset operation example:
Log in to ILOM and execute the following
command.
[In case of ILOM command mode]
->
reset /SP
Are you sure you want to reset /SP
(y/n)?
y
[In case of ALOM CMT compatible shell]
sc>
resetsc
Are you sure you want to reset the
SC [y/n]?
y
n/a
After you remove/insert the power cord and
while POST is running, the "
/SYS/XXXXX prom
is unreadable or corrupted
" message
may appear and stop at
ok
prompt. For details,
see
“After the Power Cord Removal/Insert, an
Error Message May Appear during the POST”
on page 42
Take 180 or more seconds for each of the
intervals between the system power-off and the
power cord removal, and between the removal
and insertion of the power cord.
TABLE 3-4
ILOM Issues
(Continued)
CR ID
Description
Workaround
Summary of Contents for SPARC Enterprise T5440 Server
