46
SPARC Enterprise T5440 Server Product Notes • December 2010
Firmware and General Software Issues
This section describes firmware and other general software issues known to exist at
this release of the SPARC Enterprise T5440 server.
TABLE 3-5
Firmware and General Software Issues
CR ID
Description
Workaround
6587380
The Solaris
prtdiag
-v
command displays
some sensor indicators that are not voltage
indicators under the Voltage Indicators heading.
The sensor indicators involved include:
SYS/MB
I_USB0
ok
SYS/MB
I_USB1
ok
SYS/PSx
CUR_FAULT
ok
SYS/PSx
FAN_FAULT
ok
SYS/PSx
TEMP_FAULT ok
However, the information reported under the
Condition column is accurate and represents
the current condition of the components.
Use the Condition column to assess FRU
condition.
6660556
When BUI is used to enable/disable a
component, the
/SYS
and
/SYS/MB
fault states
appear to be one screen refresh behind the actual
state.
Check for the availability of a patch for this
defect.
6660074
Asymmetric cryptographic performance can be
improved via driver tunable.
Performance can be improved by increasing the
number of ncp driver scheduling threads from
the default. (Default value is 4.) Add the
following line to the
/platform/sun4
v/kernel/drv/ncp.conf
file:
ncp-threads-per-core=6
6682176
In certain conditions, SP command to power
cycle host might not work as expected.
If multiple attempts to power cycle the server
fail then you can reset the system controller (SC)
to recover from this condition.
After the SC is reset, SC commands to power
cycle the host will work as expected.
Summary of Contents for SPARC Enterprise T5440 Server
