Fujitsu SPARC Enterprise T5140, Product Notes

Page: 91 / 138

Appendix A Fixed Issues 81
1. Turn off the power to the system.
Power-off operation example:
[Using ALOM CMT compatible shell]
[Using ILOM command mode]
2. Wait for 180 or more seconds.
3. Remove the power cord.
4. Wait for 180 or more seconds.
5. Insert the power cord.
Workaround: Take 180 or more seconds for each of the intervals between the system power-
off and the power cord removal, and between the removal and insertion of the power cord.
Fixed in System Firmware 7.2.10.a or Later
sc> poweroff -y
-> stop -script /SYS
TABLE A-5
Issues Fixed in System Firmware 7.2.10.a or Later
CR ID Description Workaround
6948710 With System Firmware 7.2.7.b or later, messages
referring to hot insertions/removals of devices
(including a nonexistent device) may be displayed
intermittently during the system startup and the
system running.
Message example of a nonexistent device:
Chassis | major: Hot insertion of
/SYS/MB/RISER1/XAUI1
Chassis | major: Hot removal of
/SYS/MB/RISER1/XAUI1
Message example of an existent device:
Chassis | major: Hot removal of
/SYS/MB/CMP0/BR1/CH0/D0
Chassis | major: Hot insertion of
/SYS/MB/CMP0/BR1/CH0/D0
Note - Fixed in System Firmware 7.2.10.a or later.
None.
ILOM firmware's way of referring to the sensor is
wrong. This has no impact on the system. If no faults
are detected by the show faulty command, ignore the
output messages.