Fujitsu SPARC Enterprise T5140, Product Notes

Page: 88 / 138

78 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
Workaround: None. Reset ILOM to recover. If the error is cleared, then it corresponds to
this event and the fan replacement is unnecessary. ILOM reset has no impact on the system.
When the T5240 Server Connected to the 100V Power Supply
and Powered On, a Message Might Be Displayed in the Solaris
OS System Log (CR 6972360)
This issue is resolved by updating the system firmware to 7.3.0.c or later.
With System Firmware 7.2.10 or later, when you connect the T5240 server which has the 1.6
GHz CPU and of 8-disk configuration to the 100V power supply and power on the system,
the following message might be displayed in the Solaris OS system log.
In the
prtdiag -v
command execution result, warning will be displayed as follows.
TACH at /SYS/FANBD0/FM0/F1 has reached low non-recoverable threshold.
3 /SYS/FANBD0/FM1 SP detected fault:
TACH at /SYS/FANBD0/FM1/F0 has reached low non-recoverable threshold.
4 /SYS/FANBD0/FM2 SP detected fault:
TACH at /SYS/FANBD0/FM2/F1 has reached low non-recoverable threshold.
Jul 23 15:18:43 xxxxxxx SC Alert: [ID 156290 daemon.notice] SC
unretrieved msg: [IPMI | minor: ID = 2561 : 07/23/2010 : 05:53:31
: Voltage : /PS1/V_IN_MAIN : Lower Non-critical going low :
reading 103.20 <= threshold 163.20 Volts]
Jul 23 15:18:49 xxxxxxx SC Alert: [ID 247593 daemon.notice] SC
unretrieved msg: [IPMI | minor: ID = 2567 : 07/23/2010 : 05:53:36
: Voltage : /PS0/V_IN_MAIN : Lower Non-critical going low :
reading 103.20 <= threshold 163.20 Volts]
Jul 23 15:18:59 xxxxxxx SC Alert: [ID 939904 daemon.error] SC
unretrieved msg: [Chassis | major: V_IN_MAIN at /SYS/PS1 has
reached low warning threshold.]
Jul 23 15:19:00 xxxxxxx SC Alert: [ID 558956 daemon.error] SC
unretrieved msg: [Chassis | major: Current configuration does not
support Power Supply redundancy due to low AC line voltage]
Jul 23 15:19:02 xxxxxxx SC Alert: [ID 935808 daemon.error] SC
unretrieved msg: [Chassis | major: V_IN_MAIN at /SYS/PS0 has
reached low warning threshold.]