Fujitsu SPARC Enterprise T5140, Product Notes

Page: 109 / 138

Appendix A Fixed Issues 99
On the DC Input Power Model, the "Environmental Status"
and Some Part of the "FRU Status" Information Is Not
Displayed (CR 6853843)
This issue is resolved by updating the system firmware to 7.2.7.b or later.
On the DC input power model of SPARC Enterprise T5140 Server, when you execute the
prtdiag
command of Solaris OS, the "Environmental Status" and some part of the "FRU
Status" information is not displayed.
Incomplete Data Output Example:
Workaround: None. From ILOM, check the component information and the status of fan,
temperature, power sensor and so on.
In the Output from the
prtdiag
Command, Warnings May
Be Displayed (CR 6821325)
This issue is resolved by updating the system firmware to 7.2.7.b or later.
In the output from the
prtdiag
command, warnings may be displayed for input voltage
sensors(V_IN_MAIN) on power supply units.
============================ Environmental Status ============================
<-- No data output.
============================ FRU Status ============================
Location Name Status
------------------------------------------------------
SYS MB enabled
SYS HDD0 enabled
SYS HDD1 enabled
<-- Part of data is not on display.
Voltage sensors:
------------------------------------------------------------
Location Sensor Status
------------------------------------------------------------
SYS/MB/CMP0/MR0
V_VMEM ok
SYS/MB/CMP0/MR0 V_+1V5_VDD ok
SYS/MB/CMP1/MR1 V_VMEM ok
SYS/MB/CMP1/MR1 V_+1V5_VDD ok
SYS/MB V_+3V3_STBY ok
SYS/MB V_+3V3_MAIN ok
SYS/MB V_+12V0_MAIN ok
SYS/MB V_VDDIO ok