Fujitsu SPARC Enterprise T5140, Product Notes

Page: 100 / 138

90 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
The message also appears for the component which is not displayed on ILOM.
Workaround: None. These messages are not the error messages. The message is displayed
at the point when ILOM restarted, in order to reload the component information, and can be
safely ignored.
On the Server with a Specific Configuration, Lower Threshold
Value of the Power Input Sensor May Not Be Correctly
Displayed (CR 6847031)
This issue is resolved by updating the system firmware to 7.2.10 or later.
On the server with a CPU frequency of 1.6 GHz and a built-in hard disk device consisting of
16 disks, the power input sensor may have a displayed lower threshold value
(/SYS/PSX/V_IN_MAIN lower_noncritical_threshold) of 0.000 Volts or N/A. The displayed
value during normal operation is 163.200 Volts.
Therefore, the power input sensor cannot detect critical input power problems in the device.
Example of display of
0.000 Volts
:
301 Tue Apr 13 14:31:07 2010 IPMI Log minor
ID = 25 : 04/13/2010 : 14:30:43 : Entity Presence : /MB/P0/MR0/P : Device
Absent
278
Tue Apr 13 14:31:06 2010 IPMI Log minor
ID = e : 04/13/2010 : 14:30:40 : Entity Presence : /FB1/PRSNT : Device
Present
-> show /SYS/PS0/V_IN_MAIN -o table
Target | Property | Value
--------------------+-------------------------+---------------
/SYS/PS0/V_IN_MAIN | type | Voltage
/SYS/PS0/V_IN_MAIN | ipmi_name | /PS0/V_IN_MAIN
/SYS/PS0/V_IN_MAIN | class | Threshold Sensor
/SYS/PS0/V_IN_MAIN | value | 206.400 Volts
/SYS/PS0/V_IN_MAIN | upper_nonrecov_thresho | N/A
| ld |
/SYS/PS0/V_IN_MAIN | upper_critical_thresho | N/A
| ld |
/SYS/PS0/V_IN_MAIN | upper_noncritical_thre | N/A
| shold |
/SYS/PS0/V_IN_MAIN | lower_noncritical_thre | 0.000 Volts
| shold |
/SYS/PS0/V_IN_MAIN | lower_critical_thresho | N/A
| ld |