Fujitsu SPARC Enterprise T5140, Product Notes

Page: 110 / 138

100 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
Workaround: None. Ignore this issue because it is only a display error.
Fixed in System Firmware 7.2.2.e or Later
SYS/MB V_VCOREL ok
SYS/MB V_VCORER ok
SYS/MB V_+1V5_IO ok
SYS/MB V_VMEML ok
SYS/MB V_VMEMR ok
SYS/MB V_VBAT ok
SYS/PS0 V_IN_MAIN warning (-48volts)
SYS/PS0 V_OUT_MAIN ok
SYS/PS1 V_IN_MAIN warning (-48volts)
SYS/PS1 V_OUT_MAIN ok
TABLE A-9
Issues Fixed in System Firmware 7.2.2.e or Later
CR ID Description Workaround
6835857 After the system power-on, when Solaris OS started,
the "
chip reset error! " message may appear
and Solaris OS may fail to start.
Note - Fixed in System Firmware 7.2.2.e or later.
Power off the system, wait for about 180 seconds, and
then power on the system.
6819987 For DC input power models, the following event log
might be repeatedly collected:
Sample output from the
showlogs command:
IPMI |minor : "ID = 20a : 03/11/2009
: 02:31:48 : Current :
/PS0/CUR_FAULT : State Asserted"
IPMI |minor : "ID = 20b : 03/11/2009
: 02:31:51 : Temperature :
/PS0/TEMP_FAULT : State Asserted"
IPMI |minor : "ID = 20c : 03/11/2009
: 02:31:54 : Current :
/PS0/CUR_FAULT : State Deasserted"
IPMI |minor : "ID = 20d : 03/11/2009
: 02:31:57 : Temperature :
/PS0/TEMP_FAULT : State Deasserted"
Note - Fixed in System Firmware 7.2.2.e or later.
None.
If the Service Required, Overtemp, and Power Supply
Service Required LEDs on the server are off, ignore the
event log items. If one of these LEDs is on, indicating
that a power supply problem or temperature-related
problem has occurred, correct the problem.
6802433 For DC input power models, the INPUT limit value
included in the output from the
showpower -v
command may differ between /SYS/PS0 and
/SYS/PS1. The /SYS/PS1 value is correct. For
examples, see
“For DC Input Power Models, the
Output from the
showpower -v
Command May
Differ between /SYS/PS0 and /SYS/PS1 (CR
6802433)” on page 104
.
Note - Fixed in System Firmware 7.2.2.e or later.
None.
Ignore this issue because it is only a display error.