Fujitsu SPARC Enterprise T5140, Product Notes

Page: 80 / 138

70 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
Format will now present the following menu, choose 0. Auto configure
AVAILABLE DRIVE TYPES:
0. Auto configure
1. Quantum ProDrive 80S
2. Quantum ProDrive 105S
[...]
17. Zip 250
18. Peerless 10GB
19. other
Specify disk type (enter its number):
0
c0t0d0: configured with capacity of 68.35GB <======= drive type corrected
<SUN72G cyl 14087 alt 2 hd 24 sec 424> <======= drive type corrected
selecting c0t0d0
[disk formatted]
Following Auto configure, the correct drive value should be reported.
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current
- describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name The jumpstart install process
!<cmd> - execute <cmd>, then return
quit
format> label
Ready to label disk, continue? y
format> quit
root@ #
8. Use the
fmthard
command and stored information to complete the recovery.
root@ # /tmp/fmthard -s /tmp/vtoc /dev/rdsk/c0t0d0s0 <=== raw boot device
used to capture vtoc.
fmthard: New volume table of contents now in place.
root@ #
CODE EXAMPLE A-1
Procedure for Recovering a Boot Drive's "drive type" (Continued)