Fujitsu SPARC Enterprise T5140, Product Notes

Page: 114 / 138

104 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
For DC Input Power Models, the Output from the
showpower
-v
Command May Differ between /SYS/PS0 and /SYS/PS1
(CR 6802433)
This issue is resolved by updating the system firmware to 7.2.2.e or later.
For DC input power models, the INPUT limit value included in the output from the
showpower -v
command may differ between /SYS/PS0 and /SYS/PS1. The /SYS/PS1
value is correct.
Example of s
howpower -v
command execution:
(*)
This is incorrect. The /SYS/PS0 value is correct.
Workaround: None. Ignore this issue because it is only a display error.
Sun Explorer May Fail to Collect the ILOM Data (Tx000) (CR
6718841)
This issue is resolved by updating the system firmware to 7.2.2.e or later.
sc> showpower -v
----------------------------------------------------------------
Power Supplies:
----------------------------------------------------------------
INPUT OUTPUT
Power Power
Supply Status (W) (W)
----------------------------------------------------------------
/SYS/PS0 OK 172.8 123.8
/SYS/PS1 OK 153.6 133.3
----------------------------------------------------------------
Total Power 326.4
----------------------------------------------------------------
INPUT INPUT INPUT OUTPUT OUTPUT OUTPUT
Volt Current limit Volt Current limit
Supply (V) (A) (A) (V) (A) (A)
----------------------------------------------------------------
/SYS/PS0 -48.0 3.60 37.20 11.9 10.40 99.20
/SYS/PS1 -48.0 3.20 8.00(*) 11.9 11.20 99.20
sc>