Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 56 / 444

deleteboard(8)
40 XSCF Reference Manual • Last Revised January 2007
OPTIONS The following options are supported.
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
■
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "
y
" to execute the command or "
n
"
to cancel the command.
-c disconnect
Detaches the XSB from the domain configuration and keeps it
assigned. If the
-c
option is omitted, "
-c disconnect
" is used.
-c reset
Reserves disconnect of an XSB. If the
-c
option is omitted, "
-c
disconnect
" is used.
-c unassign
Disconnects the XSB completely from the domain configuration
and puts it in the system board pool. If the
-c
option is omitted,
"
-c disconnect
" is used.
-f
Forcibly detaches the specified XSB.
Note – If the
-f
option is used to forcibly add a system board to
a domain, all the added hardware resources may not work
normally. For this reason, use of the
-f
option is not
recommended in normal operation. If the
-f
option must be
specified, verify the status of every added system board and
device.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-n
Automatically answers '
n
' (no) to all prompts.
-q
Suppresses all messages to stdout, including prompts.
-v
Displays a detailed message. If this option is specified with the
-q
option, the
-v
option is ignored.
-y
Automatically answers '
y
' (yes) to all prompts.
xsb Specifies the XSB number to be disconnected. Multiple xsb
operands are permitted, separated by spaces. The following xsb
form is accepted:
x–y
where:
x An integer from
00
–
15
.
y An integer from
0
–
3
.