Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 301 / 444

showdcl(8)
System Administration 279
If the
-v
option is specified, the following information is added:
Privileges
You must have one of the following privileges to run this command:
Refer to
setprivileges
(8) for more information.
Cfg-policy
Degradation range applicable for an error detected during an
initial diagnosis of hardware. Any of the following is displayed:
FRU
Degradation of a component (default)
XSB
Degradation of an XSB.
System
Degradation of a domain
No-Mem
Whether to omit the use of memory on a domain. Either of the
following is displayed:
True
Omits the use of memory on a domain.
False
Does not omits the use of memory on a
domain (default).
No-IO
Whether to omit the use of I/O devices on a domain. Either of
the following is displayed:
True
Omits the use of I/O devices on a domain.
False
Does not omit the use of I/O devices on a
domain (default).
Float
Whether to set a priority for the specified LSB as a floating
board, relative to other boards. Either of the following is
displayed:
True
Gives a higher priority to the LSB to become
a floating board.
False
Does not give a higher priority regarding
floating boards (default).
platadm
,
platop
,
fieldeng
Can execute the command for all domains.
domainadm
,
domainmgr
,
domainop
Can execute the command only for accessible domain.