Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 282 / 444

showboards(8)
318 XSCF Reference Manual • Last Revised January 2007
When the
-v
option is specified, the following types of information are displayed
as XSB detail status information:
Pwr
Power status of the XSB
n
Power is off.
y
Power is on.
Conn
Status of the XSB connection to the domain configuration
n
The XSB is not connected to the domain, or
it is located in the system board pool.
y
The XSB is connected to the domain.
Conf
Incorporation state of XSB hardware resources into the operating
system
n
The resources are not connected to the
operating system.
y
The resources are incorporated in the
operating system.
Test
Status of an initial diagnosis on an XSB
Unmount
The XSB cannot be recognized because it is
not mounted or because it has an error.
Unknown
Not performed.
Testing
The initial diagnosis is in progress.
Passed
The initial diagnosis ended normally.
Failed
Error (test=fail) detected by an initial
diagnosis. The XSB cannot be used or is in a
degraded state.
Fault
XSB degradation status
Normal
Normal
Degraded
Component in a degraded state. The XSB
can operate.
Faulted
An error occurred and the XSB cannot
operate.
R
Dynamic reconfiguration(DR) involving the reservation state of
the XSB in the domain
*
DR processing is reserved. When the
domain is rebooted, the XSB is incorporated
into or disconnected from the domain, and
the domain configuration is changed.
Cod
Whether the XSB is a COD board
n
The XSB is not a COD board.
y
The XSB is a COD board.