Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 351 / 444

showlogs(8)
System Administration 413
■
Power log
Status
: Error status
Either of the following is displayed:
Warning
Partial degradation of the unit or warning
about the FRU
Alarm
FRU failure or error
FRU
: Suspected faulty unit
The suspected faulty units that are displayed and delimited by a
comma (
,
) are the units most likely and second most likely to be
faulty. If there are three suspected faulty units, asterisk (
*
) is
displayed next to the unit third most likely to be faulty. Display
of more than two suspected faulty units depends on whether
more than two suspected faulty units are detected.
Msg
: Error description
Diagnostic
Code
:
Detailed error code
The displayed code is a hexadecimal number.
UUID
: Abbreviation for Universal Unique Identifier
This is a globally unique ID that is a 32-digit hexadecimal
number.
MSG-ID
: Unique message ID
Diagnostic
Messages
:
Detailed message
If the log has a detailed message, it is displayed.
Detail log
: Scan log code
This code is displayed when the log includes a scan log.
Address: Displayed in hexadecimal notation.
Date Event Cause DID Switch
Mar 30 17:25:31 JST 2005 System Power Off Power Failure -- Service
Mar 30 17:35:31 JST 2005 System Power On AC Restored -- Locked
Mar 30 17:45:31 JST 2005 Domain Power On Panel 00 Locked
Mar 30 17:50:31 JST 2005 Domain Power Off Operator 10 Service
:
: