Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 167 / 444

setdcl(8)
System Administration 171
OPERANDS The following operands are supported:
EXTENDED
DESCRIPTION
■
If the XSB associated with the specified LSB has been configured in the domain
configuration, the information that is set for the LSB cannot be changed. Before
making such a change, unassign the XSB from the domain configuration by
executing the
deleteboard
(8) command, or re-configure it in another domain
configuration by executing the
moveboard
(8) command.
■
If the specified domain is running, the value of
policy
cannot be changed. To
change the value, first turn off power to the domain.
■
The currently set DCL information can be checked by using the
showdcl
(8)
command.
EXAMPLES
EXAMPLE 1
Sets XSB#00-0 for LSB#00 and XSB#00-1 for LSB#01 of domain ID 0.
EXAMPLE 2
Sets
no-mem=true
for LSB#00 and #01 of domain ID 0.
EXAMPLE 3
Sets
policy=system
for domain ID 0.
If
no-io
is specified for option, either of the following can be
specified for value:
true
Omits the use of I/O devices on a domain.
false
Does not omit the use of I/O devices on a
domain (default).
If
float
is specified for option, either of the following can be
specified for value:
true
Gives a higher priority regarding floating
boards.
false
Does not give a higher priority regarding
floating boards (default).
lsb Specifies the number of the LSB whose information is to be set.
Specify by using an integer ranging from 0 to 15. Multiple lsbs
can be specified by delimiting with spaces. Specifies unique lsb
within the domain. If the same lsb number is specified, an error
occurs.
XSCF> setdcl -d 0 -a 00=00-0 01=00-1
XSCF>
setdcl -d 0 -s no-mem=true 00 01
XSCF>
setdcl -d 0 -s policy=system