Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 267 / 444

setupplatform(8)
System Administration 299
EXAMPLE 4
Configuring the Altitude.
EXAMPLE 5
Setting the Time Zone.
XSCF>
setplatform -p altitude
Do you want to set up the chassis altitude? [y|n]:
y
Chassis altitude is already configured:
Chassis altitude in meters: 200
Continue setting up the chassis altitude? [y|n]:
y
Chassis altitude in meters: 400
Chassis altitude in meters: 400
Is this setting correct? [y|n]:
y
XSCF> setaltitude -s altitude=400
400m
The specified altitude becomes valid when the circuit breakers of the
system are switched on again.
Do you want to reboot the XSCF now? [y|n]:
n
XSCF>
XSCF>
setplatform -p timezone
Do you want to set up the XSCF time zone? [y|n]: y
Chassis time zone is already configured:
XSCF time zone: US/Pacific
Continue setting up the XSCF time zone? [y|n]:
y
0 Africa/Abidjan
1 Africa/Accra
2 Africa/Addis_Ababa
3 Africa/Algiers
4 Africa/Asmera
5 Africa/Bamako
6 Africa/Bangui
7 Africa/Banjul
8 Africa/Bissau
9 Africa/Blantyre
10 Africa/Brazzaville
11 Africa/Bujumbura
12 Africa/Cairo
13 Africa/Casablanca
14 Africa/Ceuta
15 Africa/Conakry
16 Africa/Dakar
17 Africa/Dar_es_Salaam
18 Africa/Djibouti
19 Africa/Douala
20 Africa/El_Aaiun
21 Africa/Freetown
22 Africa/Gaborone
Enter number to choose time zone or return for next set of time zones:
21
XSCF time zone: Africa/Freetown
Is this setting correct? [y|n]:
y
XSCF> setaltitude -c settz -s Africa/Freetown
Africa/Freetown
XSCF>