Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 290 / 444

showcodusage(8)
332 XSCF Reference Manual • Last Revised June 2007
EXTENDED
DESCRIPTION
The
showcodusage -p resource
command displays the following COD usage
information for the system:
The
showcodusage -p domain
command displays the following COD usage
information for each domain:
Resource
Identifies the type of COD resources available (processors).
In Use
Specifies the number of COD CPUs currently used in the
system.
Installed
Specifies the number of COD CPUs installed in the system.
License
Specifies the number of COD RTU licenses installed.
Status
Specifies one of the following COD attributes:
OK
Indicates that there are sufficient licenses
for the COD CPUs in use. Also displays
the number of remaining COD resources
available and the number of any instant
access CPUs (headroom) available.
HEADROOM
The number of instant access COD CPUs
in use.
Violation
Indicates a COD RTU license violation
exists. Displays the number of COD CPUs
in use that exceeds the number of COD
RTU licenses available. This situation can
occur when you force the deletion of a
COD RTU license key from the COD RTU
license database, but the COD CPU
associated with the license key is still in
use.
Domain/Resource
Identifies COD RTU resource (processor) for each domain. An
Unused processor is a COD CPU that has not yet been
assigned to a domain.
In Use
Specifies the number of COD CPUs currently used in the
domain.