Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 373 / 444

showntp(8)
System Administration 351
NAME showntp - display the NTP information which currently set for XSCF
SYNOPSIS showntp {
-l
|
-a
| address |
-s
}
showntp
-h
DESCRIPTION The
showntp
(8) command displays the NTP information which currently set for
XSCF.
The
showntp
(8) command can display the following information:
■
NTP servers which have been registered to the XSCF network
■
Status of synchronization with the NTP servers
■
Stratum value which has been set to XSCF
Privileges You must have one of the following privileges to run this command:
useradm
,
platadm
,
platop
,
auditadm
,
auditop
,
domainadm
,
domainmgr
,
domainop
,
fieldeng
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
The
setntp
(8) command sets the NTP servers used in the XSCF network.
-a
Displays all the NTP servers currently set for the XSCF network.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-l
Displays whether synchronization with an NTP server is being
maintained.
-s
Displays the stratum value which has been set to XSCF.
address Specifies the IP address of an NTP server to be displayed. A
specified IP address is a set of four integer values delimited by
the period (.). If the
-a
option is specified, the operand is
ignored. The following address form is accepted:
xxx.xxx.xxx.xxx
where:
xxx
An integer from 0–255. Zero suppression can
be used to specify the integer.