Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 26 / 444

Intro(8)
4 XSCF Reference Manual • Last Revised June 2006
setldap
configure the Service Processor as a Lightweight Directory
Access Protocol (LDAP) client
setlocale
sets the default locale of the XSCF
setlocator
control the blinking of the CHECK LED on the operator
panel
setlookup
enable or disable the use of the Lightweight Directory
Access Protocol (LDAP) server for authentication and
privilege lookup
setnameserver
set the domain name system (DNS) servers used in the
XSCF network
setnetwork
configure a network interface using by XSCF
setntp
set the NTP servers used in the XSCF network
setpasswordpolicy
manage the system password policy
setpowerupdelay
set the warm-up time of the system and wait time before
system startup
setprivileges
assign user privileges
setroute
set routing information for an XSCF network interface
setshutdowndelay
set the shutdown wait time at power interruption of the
uninterruptible power supply (UPS)
setsmtp
set up the SMTP settings
setsnmp
manage the SNMP agent
setsnmpusm
specify the SNMPv3 agent’s User-based Security Model
(USM) configuration
setsnmpvacm
modify the SNMPv3 agent’s View-based Access Control
Model (VACM) configuration
setssh
set the SSH service used in the XSCF network. Also,
generate the host public key, and register or delete the user
public key, which are necessary for the SSH service
settelnet
start or stop the telnet service used in the XSCF network
settimezone
set the time zone and Daylight Saving Time of XSCF
setupfru
set up device hardware
setupplatform
set up platform specific settings
showaltitude
display the altitude state of the system
showarchiving
display log archiving configuration and status