Fujitsu SPARC Enterprise M4000, Reference Manual, Page: 226 / 444

setroute(8)
246 XSCF Reference Manual • Last Revised June 2007
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-m
address Specifies the netmask to which routing information is
forwarded. The specified value is a set of four integer values
delimited by the period (
.
). The following address form is
accepted:
xxx.xxx.xxx.xxx
xxx An integer from
0
–
255
. Zero suppression
can be used to specify the integer.
If the
-m
option is omitted and the
-n
option is used to specify
the network address (containing "0" in the default host address
which depends on the class), the following net mask value is set,
according to the class of the network address:
class Mask value
A
255.0.0.0
B
255.255.0.0
C
255.255.255.0
If the
-m
option is omitted and the host address specified by the
-n
option, net mask is not set.
If "
0.0.0.0
" specified by the
-n
option, net mask is invalid.
If specified with the "-
c del
" option, this option can't be
omitted.
-n
address Specifies an IP address to which routing information is
forwarded. The specified value is a set of four integer values
delimited by the period (
.
). It is specified in the format shown
below. If this option is omitted, it is automatically set by XSCF.
The following address form is accepted:
xxx.xxx.xxx.xxx
xxx
An integer from
0
–
255
. Zero suppression
can be used to specify the integer.
If "
0.0.0.0
" is specified for address, the default routing
information can be set.