Fujitsu PRIMERGY TX2550 M4, Upgrade And Maintenance Manual

Page: 134 / 563

134
Upgrade and Maintenance Manual TX2550 M4
Basic software procedures
Ê
After the fan test is complete, restore the time setting to its initial value and
click
Save Page .
In case of maintenance done by Fujitsu engineers in Japan:
Executing the fan test via Chassis ID Prom Tool
I
Please follow the instructions provided separately.
5.2.21 Specifying the chassis model
In order to have your server displayed correctly as a rack system in the
ServerView management user interface after a chassis conversion, the chassis
model setting needs to be updated.
This can be accomplished using the ServerView Installation Manager or
Maintenance Tools:
Using the ServerView Installation Manager
Ê
Boot the system from the ServerView Suite DVD. The ServerView
Installation Manager is being started.
Ê
Select your preferred user interface language.
Ê
Under Status backup media select No status backup and click Continue .
Ê
Select Maintenance .
Ê
Select Server Configuration Manager .
Ê
Check the box for rack model and save the setting by clicking Save .
Using the ServerView Maintenance Tools
On Windows-based servers with ServerView agents installed, proceed as
follows:
Ê
Click Start , point to All Programs , and then point to Fujitsu - ServerView Suite -
Agents - Maintenance Tools .
Ê
In the Maintenance Tools menu pane, click the Chassis Model Configuration tab.
Ê
Under
Convert to
click the
Rack Model
button.
Ê
Click Exit to close the Maintenance Tools menu pane.