Fujitsu PRIMERGY TX2550 M4, Upgrade And Maintenance Manual

Page: 107 / 563

TX2550 M4 Upgrade and Maintenance Manual
107
Basic software procedures
Viewing boot watchdog settings in the iRMC web interface
Ê
Enter the ServerView iRMC web interface.
Ê
Select the Server Management menu.
Ê
Under Watchdog Settings , you can obtain more information about the current
watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
I
For more information on iRMC settings, see the iRMC user guides.
Viewing boot watchdog settings in ServerView Operations Manager
Ê
In ServerView Operations Manager Single System View select Maintenance
from the
Information/Operation
menu.
Ê
Under ASR&R select the Watchdog tab to obtain more information about the
current watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
I
For more information, see the "ServerView Operations Manager - Server
Management" user guide.
5.1.2.2 Configuring boot watchdog settings
If the system is to be started from removable boot media for firmware upgrade
purposes, the Boot watchdog needs to be disabled before starting maintenance
task. Otherwise, the Boot watchdog might initiate a system reboot before the
flash process is complete.
V
CAUTION!
An incomplete firmware upgrade process may render the server
inaccessible or result in damaged/destroyed hardware.
Timer settings can be configured in the BIOS or using the ServerView iRMC
web interface.
Configuring boot watchdog settings in the BIOS
Ê
Enter the BIOS.
Ê
Select the Server Mgmt menu.
Ê
Under Boot Watchdog set the Action setting to Continue .
Ê
Save your changes and exit the BIOS.