Fujitsu PRIMERGY TX2550 M4, Upgrade And Maintenance Manual

Page: 119 / 563

TX2550 M4 Upgrade and Maintenance Manual
119
Basic software procedures
Using the command line interface (Linux/VMware only)
The memory error counter can be reset using the
meclear
utility which is part
of the ServerView agents for Linux.
I
meclear
(Memory Module Error Counter Reset Utility) allows to reset
the error count collected for a memory module, for example after it has
been replaced.
For more Information, see the
meclear
manual pages.
Ê
Log in as root.
Ê
Enter the command below, followed by
[ENTER]
:
/usr/sbin/meclear
Ê
Select the number of a memory module with a status other than "OK" or
"Not available".
Ê
Repeat the step above until all memory modules show the "OK" status.
Ê
Ensure that all pre-fail/fail status issues have been resolved in ServerView
Operations Manager.
5.2.7.2 CPUs
ServerView Operations Manager may report a defective CPU in case of a
critical error.
I
Important note
After replacing a defective CPU, the error counter must be reset
manually using one of the methods below.
Using ServerView Maintenance Tools (Windows only)
Ê
Launch the ServerView Maintenance Tools:
Start > Apps > Fujitsu > Maintenance Tools
Ê
Choose the CPU status tab.
Ê
Select the CPU which shows the pre-failure status.
Ê
Click on Reset Status .
Ê
Ensure that all pre-fail/fail status issues have been resolved in ServerView
Operations Manager.