Using the BIOS
▶
Enter the BIOS.
▶
Select the
Configuration
menu.
The addresses are displayed at the one or more of the following (it depends on
the behavior of the UEFI driver included in each controller).
1
.
The addresses are displayed at the
UEFI driver
menu included in each
controller in the
Configuration
menu.
2
.
Select the
UEFI driver
menu included in each controller. The addresses are
displayed at the help for the
UEFI driver
menu included in each controller.
3
.
Enter the
Network Device List
menu. The addresses are displayed in the
Network Device List
menu.
Only network controllers supporting the Command Line Protocol (CLP)
will be displayed.
5.2.8
Switching off the ID identicators
The ID indicators can also be deactivated using IPMI.
Using the ID button on the I/O panel
▶
Press the ID button on the I/O panel to switch off the ID indicators.
"Indicators on the I/O panel" on page 210
Basic software procedures
74
Upgrade and Maintenance Manual
RX2450 M1
Summary of Contents for PRIMERGY RX2450 M1
