Figure 68: Installing the RAID controller
▶
Carefully insert the RAID controller into the PCIe slot and press down firmly
until it is fully seated in the slot.
▶
Fasten the slot bracket with the screw.
▶
Connect the SAS/SATA cables.
Concluding steps
▶
Install the riser module 1, see
"Installing the riser module 1" on page 54
▶
▶
Connect all external cables to the expansion card(s).
▶
"Connecting the power cord" on page 48
▶
"Switching on the server" on page 49
9.3.2
Removing a RAID controller from riser module 1
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools:
Phillips PH2 / (+) No. 2 screw driver
Expansion cards and riser cards
RX2450 M1
Upgrade and Maintenance Manual
107
Summary of Contents for PRIMERGY RX2450 M1
