Figure 12: Fixing the power cord and the PSU by cable tie
▶
Loop the cable tie around the power connector and the handle of the PSU
(1).
▶
Pull tight the cable tie (2) to secure the power connector.
▶
Connect the main plug to an power outlet of the rack socket strip.
▶
Ensure that the status indicator on the PSU is lit green, see
.
It will take about 60 seconds until the server can be powered on.
4.7
Switching on the server
CAUTION
▶
Before switching on the server, make sure the top cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top cover is removed.
▶
"Important information" on page 25
.
▶
Press the On/Off button to start up the server.
▶
Ensure that the power-on indicator is lit green.
Basic hardware procedures
RX2450 M1
Upgrade and Maintenance Manual
49
Summary of Contents for PRIMERGY RX2450 M1
