manualshive.com logo in svg

Fujitsu PRIMERGY RX1330 M4, Upgrade And Maintenance Manual, Page: 253 / 403

Share
Download
Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual Download Page 253

▶

"Switching on the server" on page 58

.

When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message

CPU has been changed

.

This only indicates that the CPU configuration has been altered. There
is no technical problem.

Proceed as follows:

●

Restart your server.

●

As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.

●

If a password is assigned, enter the password and press [Enter].

●

Select the 

Save & Exit

 menu.

●

Select 

Save Changes and Exit

 or 

Save Changes and Reset

.

●

Verify that the Global Error indicator stops flashing.

▶

"Resetting the error status after replacing memory modules or CPU" on 
page 76

.

▶

"Enabling replaced components in the BIOS" on page 81

.

▶

"Resuming BitLocker functionality" on page 86

.

11.4

Replacing the heat sink

Field Replaceable Unit
(FRU)

Hardware: 15 minutes

Tools:

Phillips PH2 / (+) No. 2 screw driver

Depending on ATD support, there are different heat sinks available, see

" Types of heat sinks (A)" on page 242

 and 

"Types of heat sinks (B)" on 

page 243

.

Processor (CPU)

RX1330 M4

Upgrade and Maintenance Manual

253

Summary of Contents for PRIMERGY RX1330 M4




















































































































































































































































































































































































































Reviews:

No comments