manualshive.com logo in svg

Fujitsu PRIMERGY RX1330 M4, Upgrade And Maintenance Manual, Page: 353 / 403

Share
Download
Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual Download Page 353

16.2.3.2

ID, CSS and Global Error indicators

Figure 245: Indicators on the I/O panel: ID, CSS and Global Error indicators

1

ID indicator, CSS indicator, Global
Error indicator

Note on CSS and Global Error indicators on the I/O panel:

If CSS and Global Error indicators are located in the same place on the
I/O panel of the server, also check the indicators on the front panel to
determine if a CSS or Global Error event has been detected.

For more information on detected errors, see the System Event Log or
use the ServerView Operations Manager or iRMC web interface.

ID indicator (1)

See also 

"iRMC-related status signals" on page 354

.

Status

Description

blue on

The server has been highlighted using ServerView
Operations Manager, iRMC web interface or the ID
button on the front panel for easy identification.

flashing blue

The server has been highlighted for easy identification
using the iRMC (AVR) with disabled local VGA output.

Appendix A

RX1330 M4

Upgrade and Maintenance Manual

353

Summary of Contents for PRIMERGY RX1330 M4




















































































































































































































































































































































































































Reviews:

No comments