Fujitsu PRIMERGY RX1330 M4, Upgrade And Maintenance Manual, Page: 356 / 403

LAN speed indicator (2)
Status Description
yellow on Data traffic at a transfer rate of 1 Gbit/s.
green on Data traffic at a transfer rate of 100 Mbit/s.
off Data traffic at a transfer rate of 10 Mbit/s.
Indication of LAN connection supporting Energy Efficient Ethernet (EEE
mode)
To configure the EEE mode, it is necessary that the onboard LAN or an add-in
LAN card supports this mode and the connected switch supports this mode as
well.
Indicator if
EEE mode is
active Status Description
LAN link/
transfer
indicator short flashing green 3x,
then off A LAN connection has been
established (1 Gbit or 100 Mbit)
and EEE mode is active.
LAN speed
indicator
short flashing yellow 1x,
then 2 seconds off
green off
Data traffic at a transfer rate of
1 Gbit/s.
short flashing green 1x,
then 2 seconds off
yellow off
Data traffic at a transfer rate of
100 Mbit/s
Note on the onboard LAN controller
The system board is equipped with a Gigabit Ethernet Controller that
supports transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s.
The separate management LAN connector is used as a management
interface (iRMC S5) and is prepared for operation with the Remote
Management. Optionally LAN connector 1 can also be used for iRMC
S5 server management.
Appendix A
356 Upgrade and Maintenance Manual RX1330 M4