manualshive.com logo in svg

Fujitsu PRIMERGY RX1330 M4, Upgrade And Maintenance Manual, Page: 42 / 403

Share
Download
Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual Download Page 42

Labels on plastic casing parts

Please avoid sticking your own labels on plastic parts wherever possible, since
this makes it difficult to recycle them.

Returns, recycling and disposal

Please handle returns, recycling and disposal in accordance with local
regulations.

The device must not be disposed of with domestic waste. This
device is labeled in compliance with European directive
2012/19/EU on waste electrical and electronic equipment
(WEEE).

This directive sets the framework for returning and recycling used
equipment and is valid across the EU. When returning your used
device, please use the return and collection systems available to
you.

More information can be found at:

https://ts.fujitsu.com/recycling

Details regarding the return and recycling of devices and consumables within
Europe can also be found in the "Returning used devices" manual, via your
local Fujitsu branch, or at:

https://ts.fujitsu.com/recycling

Important information

42

Upgrade and Maintenance Manual

RX1330 M4

Summary of Contents for PRIMERGY RX1330 M4




















































































































































































































































































































































































































Reviews:

No comments