Fujitsu PFU Rack2-Filer, User Manual

Page: 411 / 463

Rack2-Filer User's Guide
| 411
[Problem]
Sheets are always scanned under the same conditions (scan pages, colors,
resolution, etc.) when using a scanner (TWAIN compatible).
D On the Rack2-Viewer Window [Rack2-Viewer Settings] dialog box,
select [Display driver screen] in the [Scanner Insertion] tab.
After this is selected, when a scan is performed, the driver screen will
appear on which you can set conditions for scanning.
If [Display driver screen] is cleared, scanning is performed with the
specified settings, without displaying the scanner driver window.
[Problem]
The pages of a document are turned upside-down when scanned.
D Refer to "7.6 Turning a Page Upside-down" (Page 172), and correct
the affected pages.
According to the document, the scan direction may not be corrected
properly. In this case, display the [Scanner Insertion] tab in the [Rack2-
Viewer Settings] dialog box of the Rack2-Viewer Window, and clear
[Automatically correct for upside-down scanner input].
[Problem]
When scanning a photo with the ScanSnap, the back side of the photo is also
scanned.
D
If there is writing on the back of the photo or if the back of the photo is
dirty, the back side of the photo may also be scanned, even if [Allow
automatic blank page removal] is selected.
To not scan the back side of photos, the following settings in ScanSnap
Manager are recommended:
•
Right-click the "ScanSnap Manager" icon and select [Simplex
Scan].
•
In the [Scanning] tab of the ScanSnap Manager settings
window, select [Simplex Scan (Single-sided)] for [Scanning
side].