Fujitsu PFU Rack2-Filer User Manual Download Page 284

Page: 284 / 463

Chapter 7 Rack2-Viewer Window Operations

284 |

Rack2-Filer User's Guide

7.46

Cutting a Card

This section describes how to cut a card and move it to the clipboard.

Right-click on a card and select [Cut/Move (to Card
Clipboard)].

The card is cut and moved to the clipboard.

• If a card already exists on the clipboard, a message will

be displayed to confirm whether to rewrite the existing
card.

• The card copied to the clipboard can be pasted in front

of another card, or on another card sheet.

• A card can be moved by dragging and dropping it. A

card can be moved to another card sheet by dragging
the card off the card sheet.

Summary of Contents for PFU Rack2-Filer
















































































































































































































































































































































































































































































Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands

Fujitsu PFU Rack2-Filer, User Manual

Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands