Fujitsu PFU Rack2-Filer User Manual Download Page 196

Page: 196 / 463

Chapter 7 Rack2-Viewer Window Operations

196 |

Rack2-Filer User's Guide

Click the [OK] button.

The contents page information is updated.

• If content information has already been set for this

page, the existing information will be shown in the
dialog box.

• The entered text appears in the "Entry Title" column in

contents pages.

• The text is limited to maximum of 50 characters.
• This text can be specified as a search condition for

searching binders.

• For more details, click the [Help] button in the

[Contents Entry] dialog box, and refer to the "Rack2-
Viewer Help" pages.

Summary of Contents for PFU Rack2-Filer
















































































































































































































































































































































































































































































Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands

Fujitsu PFU Rack2-Filer, User Manual

Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands