Fujitsu PFU Rack2-Filer User Manual Download Page 303

Page: 303 / 463

Rack2-Filer User's Guide

| 303

A dialog box related to the selected storage destination
appears.

For the subsequent operations, refer to "8.2 Exporting to Cloud
Service" (Page 306) and "8.3 Exporting to Mobile" (Page 321).

Exporting a page

The following describes how to save the page displayed in the Rack2-Viewer
window as a PDF file.

In the Rack2-Viewer window, open the page to be exported
to cloud service/mobile.

Right-click on the page and select the menus as follows:

• To export to Evernote

[Export to] - [Evernote]

• To export to Google Docs

[Export to] - [Google Docs(TM)]

• To export to Salesforce Chatter

[Export to] - [Salesforce Chatter]

• To export to SugarSync

[Export to] - [SugarSync]

• To export to mobile

[Export to] - [iPad/iPhone/iPod touch]

A dialog box related to the selected storage destination
appears.

For the subsequent operations, refer to "8.2 Exporting to Cloud
Service" (Page 306) and "8.3 Exporting to Mobile" (Page 321).

Summary of Contents for PFU Rack2-Filer
















































































































































































































































































































































































































































































Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands

Fujitsu PFU Rack2-Filer, User Manual

Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands