Fujitsu PFU Rack2-Filer User Manual Download Page 353

Page: 353 / 463

Rack2-Filer User's Guide

| 353

• Using WorkArea to move the photos or documents

1. Click

. Or right-click on the page and select [Photo/Document

Selection Mode].

The "selection mode of photos, documents and comments" is

switched to

2. Right-click on a photo or document to be moved and select [Move

Photo or Document to WorkArea].

A message appears.

3. Click the [OK] button.

The photo or document is cut and moved to the WorkArea.

4. Display the destination binder in the Rack2-Viewer window.
5. Display the WorkArea.

The photo or document has been moved.

6. In the WorkArea, select the photo or document to be moved, and drop

it onto the destination Rack2-Viewer window.

Summary of Contents for PFU Rack2-Filer
















































































































































































































































































































































































































































































Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands

Fujitsu PFU Rack2-Filer, User Manual

Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands