Fujitsu PFU Rack2-Filer User Manual Download Page 191

Page: 191 / 463

Rack2-Filer User's Guide

| 191

Enter the URL to be used for the hyperlink, or file link.

Click the [OK] button.

The [Configure Hyperlink] dialog box appears.

Click the [OK] button.

The hyperlink is set.

• String input in "Text" can be specified as a search

condition for searching binders.

• Up to ten annotations in total can be added per page.
• You can change the frame size of a hyperlink by dragging

its four corners ( ) after right-clicking on the hyperlink to
display the frame.

• A hyperlink can be edited or deleted. For more details, click

and refer to the "Rack2-Viewer Help" pages.

Summary of Contents for PFU Rack2-Filer
















































































































































































































































































































































































































































































Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands

Fujitsu PFU Rack2-Filer, User Manual

Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands