Fujitsu 10 ppm, User Manual

Page: 95 / 146

5-2 User’s Manual
Table 5-1 lists the printer’s periodic routine maintenance and indicates
when this maintenance should be performed.
Table 5–1 Periodic Routine Maintenance
Maintenance When to perform
Replace toner bottle When the message display indicates
TONER LOW or TONER EMPTY , or␣ when
printing is too light
Replace print unit When print quality is bad, even after
replacing or cleaning other parts
When the message display indicates
<CLEAR WARNING> PRINT UNIT
(Replace the print unit at the next
replacement of the toner bottle)
Clean corona wire When replacing the print unit or toner
bottle, when printout shows vertical white
lines, or when printing is too light
Clean paper path When replacing the print unit or toner
bottle, after clearing a paper jam, or when
printouts show toner smudging
Clean precharger wire When print density is uneven or when
printing shows black vertical lines
Replacing the Toner Bottle
The toner bottle is designed to last approximately 5000 printed pages
under the condition of 5% coverage on A4 paper or last about one year
after unpacking. The first toner bottle may print slightly fewer pages.
Replace the toner bottle when the message display indicates TONER LOW
or
TONER EMPTY
or when printing becomes lighter than you find
satisfactory. After the toner low condition occurs, you can only print
about 20 more pages. Under the toner empty condition (no toner),
the printer will not work.
Periodic Routine
Maintenance
Periodic Routine Maintenance